cleaning and maintaining the air conditioner

MAINTAINING YOUR AIR CONDITIONER

If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition.

1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and disconnect the power plug. There may be internal damage if moisture is left in components.

2.Before using the air conditioner again, dry the inner components of the air conditioner again by running in Fan mode for 3 to 4 hours. This helps remove odors which may have generated from dampness.

Periodical checks

Refer to the following chart to maintain the air conditioner properly.

 

 

Type

 

 

 

 

Description

 

Monthly

 

Every 4

Once a

 

 

 

 

 

 

 

 

months

 

year

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clean the air filter (1)

￿

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clean the condensate drain pan (2)

 

 

 

 

￿

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Thoroughly clean the heat exchanger (2)

 

 

 

 

 

Indoor unit

 

 

 

 

￿

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clean the condensate drain pipe (2)

 

 

￿

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Replace the remote control batteries (1)

 

 

 

 

￿￿

Clean the heat exchanger on the outside of
the unit (2)

￿

Clean the heat exchanger on the inside of

the unit (2)

￿

Clean the electric components with jets of
air (2)

￿

Outdoor unit

Verify that all the electric components are
firmly tightened (2

￿

Clean the fan (2)

￿

Verify that all the fan assembly is firmly
tightened (2

￿

Clean the condensate drain pan (2)

￿

￿￿￿: This check mark requires checking the indoor/outdoor unit periodically, following to the description to maintain the air conditioner properly.

The checks and maintenance operations described are essential to guarantee the efficiency of the air conditioner. The frequency of these operations varies according to the characteristics of the area, the amount of dust, etc.

(1)The described operations should be performed more frequently if the area of installation is very dusty.

(2)These operations must always be performed by qualified personnel. For more detailed information, see the Installation Manual.

30_ cleaning and maintaining