Selecting Mode
mode helps users to fall asleep well after going to bed whether
being too hot to sleep or being awakened by coldness. The | mode can be | |
selected only when the air conditioner is switched on in cool/heat mode. | ||
|
|
|
1 Press the | (On/Off) button. |
|
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2 Press the | button to select cool or heat mode. |
|
Result: | The indoor unit beeps each time you press the | button. |
| The air conditioner runs in cool or heat mode. |
|
3Press the button.
Result: The timer indicator is displayed.
The Off timer is blinking on the remote control.
4 To set the Off timer, press the buttons once or more times until the required Off time is displayed.
Result: The mode will be automatically stopped in
8 hours if the operation time is not set.
You can set the Off timer by pressing the buttons to
turn off the mode automatically at the appointed time within a range of 30 minutes to 12 hours.
Each time the buttons are pressed, the time is
increased by 30 minutes or 1 hour. mode will be stopped at the appointed off time.
5 Press the | button. |
|
|
|
|
Result: | The remaining time is displayed. |
|
| ||
Note | In the case of selecting | mode or adjusting the extra | |||
| time for | mode, you should press the | button | ||
| within 10 seconds. If you do not press the | button within | |||
| 10 seconds, |
| mode will be canceled automatically. |
6Press the button to adjust the temperature until the desired temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result: Each time you press the button;
-The temperature adjusts by 1°C
-The indoor unit beeps