Temperature and Humidity Ranges

The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use.

MODE

OPERATING CONDITIONS

IF OUT OF CONDITIONS

 

Indoor temp: 16°C~32°C

- A safety device will stop continuously the

 

system functioning;

 

 

COOL

Indoor humidity: below 80%

- Condensation may occur on the indoor unit

 

Outdoor temp: 21°C~43°C

with risk to have either water blow off or drops

 

on the floor;

 

 

HEAT

Indoor temp: below 27°C

- A safety device will stop continuously the

 

Outdoor temp: 0°C~24°C

system functioning;

 

 

 

 

 

 

 

Indoor temp: 16°C~32°C

- A safety device will stop continuously the

 

system functioning;

 

 

DRY

Indoor humidity: below 80%

- Condensation may occur on the indoor unit

 

Outdoor temp: 18°C~43°C

with risk to have either water blow off or drops

 

on the floor;

 

 

POWER SUPPLY

Single phase rated voltage

220V-240V~50Hz

minimum and maximum limit

198V min.-264V max.

 

Any damage occurs out of condition specified cannot be covered by product warranty.

If the system works continuosly outside of conditions, its performace and reliability will be compromised.

Operating Recommendations

When you use your air conditioner, it is recommended that you read the following:

Topic

Recommendation

 

 

Heating capacity

The heat pump inside the air conditioner absorbs heat from outside air and brings itindoors.

 

If the temperature of the outside air drops, the air conditioner heats less. If the room is not warm

 

enough, use an additional heating appliance.

 

 

Warm air circulation

The air conditioner circulates warm air to heat your room. It will take some time to warm

 

the air in your room entirely after the air conditioner turns on.

 

Therefore, turn the air conditioner on in advance.

 

 

Frost

When you select the Heat mode, frost may form in the outdoor unit due to low temperature

 

and high humidity.

 

If this happens:

 

The heating operation is stopped.

 

The air conditioner defrosts automatically for about 7 minutes. After about 7 minutes,

 

the air conditioner starts operating again normally.

 

 

High indoor and

If both the indoor and outdoor temperatures are high when you select the Heat mode,

outdoor temperatures

the fan and the compressor of the outdoor unit may stop periodically.

 

This is normal; wait until the air conditioner turns on again.

 

 

Power failure

If a power failure occurs when the air conditioner is operating, the air conditioner will turn off.

 

When the power returns, the air conditioner will start up again automatically.

 

 

Protection mechanism

When the air conditioner is started immediately after being plugged in or stopped,

 

the normal operation starts up after 3 minutes for the reason of protection.

 

 

E-26

Page 26
Image 26
Samsung AQ12MSDX, AQ12MSDN manual Temperature and Humidity Ranges, Operating Recommendations

AQ12MSDX, AQ12MSDN specifications

Samsung, a leader in innovation and technology, has made significant strides in the HVAC (heating, ventilation, and air conditioning) sector with its range of air conditioning units, including the Samsung AQ18MSDN, AQ09MSDX, AQ12MSDN, AQ24MSDX, and AQ18MSDX. These models incorporate advanced features and smart technologies aimed at delivering efficient cooling and heating solutions tailored to meet various consumer needs.

The Samsung AQ series is recognized for its energy efficiency, promoting sustainability while reducing energy costs. Many of these models are equipped with digital inverter technology, which ensures that the compressor operates at variable speeds. This means that the system can adapt to the indoor temperature, maintaining a consistent climate without frequent on-off cycling that conventional compressors typically utilize. This not only helps in conserving energy but also enhances the durability of the unit.

The AQ18MSDN, for instance, boasts powerful cooling capabilities along with a high energy efficiency ratio (EER), making it ideal for larger spaces. It features a sleek, modern design that seamlessly integrates into any interior while providing powerful airflow and ventilation. The model is equipped with a smart sensor that adjusts the temperature based on the occupancy of the room, optimizing performance.

On the other hand, the AQ09MSDX is a compact unit that suits smaller rooms perfectly. It offers quiet operation, ensuring comfort without disruptive noise levels. The inclusion of triple protection technology enhances durability, safeguarding the unit against voltage fluctuations, humidity, and dust.

Another notable model, the AQ12MSDN, strikes a balance between efficiency and performance, making it versatile for both residential and office environments. It includes features such as a self-cleaning function that prevents the buildup of harmful mold and bacteria, promoting healthier air quality.

In contrast, the AQ24MSDX takes cooling to the next level, ideal for larger commercial spaces. It is equipped with advanced filtration systems that significantly reduce airborne pollutants, providing a safer and healthier indoor environment.

Lastly, the AQ18MSDX merges power and features, making it suitable for various applications. Its intuitive control panel allows users to customize settings according to their preferences.

In conclusion, Samsung’s AQ series air conditioners stand out for their energy-saving capabilities, innovative designs, and smart technologies. Whether it’s for a compact apartment or a spacious office, these models provide reliable and efficient climate control solutions tailored to customer needs.