Selecting the Cool Mode

You can select the Cool mode if you want to cool your room.

You can adjust the temperature and the fan speed when cooling

1If necessary, press the (On/Off) button.

Result:The operation indicator on the indoor unit lights up.

The air conditioner starts up in the mode you selected last. The indoor unit beeps.

2Press the button on the remote control until is displayed.

Result:

The indoor unit beeps each time you press the

button.

 

The air conditioner runs in the Cool mode.

 

Note

You can change modes at any time.

 

3 Press the button to adjust the temperature until the required temperature is displayed.

You can set the temperature between 16°C and 30°C.

Result:Each time you press the button: - The temperature is adjusted by 1°C

- The indoor unit beeps

If the room temperature is higher than the selected temperature, the air conditioner starts cooling.

If the room temperature reaches the set temperature, the

air conditioner stops cooling, but the fan operates consistently.

4 Press the

button to select the fan speed until the required settingis

displayed.

 

 

 

 

 

Automatic (rotated :

)

 

Low

 

 

 

Medium

High

Turbo (Maximum)

Result:Each time you press the button, the indoor unit beeps. The fan speed indicator increases and decreases

continuously and turns round each time you press the button.

5 To control the airflow direction, refer to pages 16 and 17.

E-10