viewing your air conditioner
CHECKING THE REMOTE CONTROL
You can activate the air conditioner by pointing the remote control away from it. When using the remote control, always point it directly at the air conditioner.
Remote control display 
Power | Turbo |
Turn on/off the air conditioner. | Operate in auto fan speed to |
| cool/warm quicly. |
Mode
Set one of the 5 operating modes (see pages 14~18 for instructions).
Fan 
Adjust how much air flows through the air conditioner with the 5 different fan speeds such as Auto/Silence/Low/Medium/High.
Air swing 
Activate/Deactivate air flow blade movement automatically up and down.
Temp
Increase/Decrease the temperature by 1˚C.
Evap.CLEAN 
Evaporator clean function – Dry inside of the indoor unit to get rid of odor.
Smart Saver 
Less energy usage makes your space cool between the temperature range of 24ºC~30ºC.
On Timer
Set the On Timer on.
Off Timer
Set the Off Timer on.
Set the 
function on/off.
Comfort Care
Set the Comfort Care function on/off.
Filter Reset
Reset the Filter Clean reminder.
Set/Cancel
Set/Cancel the timer/ | mode. | |
Set the | mode on. |
|
Time |
|
|
Adjust the time for timer/ | mode. | |
Temp/Humi
• Display the room humidity level and temperature value for 5 seconds on the indoor unit display:
-Hi: High (If the relative humidity is 70% or higher)
-Sd: Standard (If the relative humidity is lower than 70%)
-For room temperature will be displayed the value.
•Press and hold this button for 3 seconds to light off the indoor unit display.
When you press the button, a short beep will sound and a transmit indicator(
) appears on the remote control display.
12_ viewing
