Cool
In Cool mode, the air conditioner will cool your room. You can adjust the temperature and the fan speed to feel cooler in hot season.
1.Turn on the air conditioner.
Press the Power 
button on the remote control.
2. Set the operating mode.
Press the Mode button on the remote control until Cool mode indicator appears on the remote control display.
The air conditioner operates in Cool mode and it will lower the temperature in your room.
Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry, Fan and Heat.
3.Set the temperature.
Press the Temp or button on the remote control to increase or decrease the desired temperature.
You can set the desired temperature between the range of 16˚C~30˚C.
You can increase/decrease the temperature by 1˚C.
4.Set the fan speed.
Press the Fan or button on the remote control to set the desired fan speed.
If room temperature reaches desired value, the air conditioner will shut off cooling for a while and just the fan runs.
Each time you press the Fan or button,
fan speed will change in order of Auto,Silence, Low, Medium and High.
•While you are using the remote control, make sure correct indicator which matches your selection appears on the remote control display.
•Air flow can be adjusted manually (see page 19 for instructions).
•If current outside temperatures are much higher than the selected indoor temperature, it may take time to bring the inner temperature to the desired coolness.
•Press the Temp/Humi button on the remote control to check the temperature and humidity level in a room.
•Silence mode( 
) makes the noise quieter during operating the indoor unit in the Cool mode.
ENGLISH
operating _15
