Operating Recommendations
When you use your air conditioner, it is recommended that you read the following:
| Topic | Recommendation |
|
|
Heating capacity | The heat pump inside the air conditioner absorbs heat from outside air and brings itindoors. |
| If the temperature of the outside air drops, the air conditioner heats less. If the room is not warm |
| enough, use an additional heating appliance. |
|
|
Warm air circulation | The air conditioner circulates warm air to heat your room. It will take some time to warm |
| the air in your room entirely after the air conditioner turns on. |
| Therefore, turn the air conditioner on in advance. |
|
|
Frost | When you select the Heat mode, frost may form in the outdoor unit due to low temperature |
| and high humidity. |
| If this happens: |
| The heating operation is stopped. |
| The air conditioner defrosts automatically for about 7 minutes. After about 7 minutes, |
| the air conditioner starts operating again normally. |
|
|
High indoor and | If both the indoor and outdoor temperatures are high when you select the Heat mode, |
outdoor temperatures | the fan and the compressor of the outdoor unit may stop periodically. |
| This is normal; wait until the air conditioner turns on again. |
|
|
Power failure | If a power failure occurs when the air conditioner is operating, the air conditioner will turn off. |
| When the power returns, the air conditioner will start up again automatically. |
|
|
Protection mechanism | When the air conditioner is started immediately after being plugged in or stopped, |
| the normal operation starts up after 3 minutes for the reason of protection. |
|
|
Cooling operation | The indoor unit may not get the selected fan speed such as Medium and Low under cooling |
| operation at very low outdoor temperatures for the protection of the indoor unit from ice |
| or frost. |
| During Low fan speed operation, cooling performance will be reduced. |
| If the room does not be cooled down when using Low fan speed operation, please adjust the |
| indoor unit’s fan speed. |
|
|
Silence Mode | When you operate Silence Mode in cooling and heating, fan speed will decrease to make |
| noise quieter. |
| As a result, the performance of the unit may be reduced. |
|
|
Vivace_Inv_IB_28491A_E_11.28.indd 28 |
|
| |
|
| ||
|
|
|
|