Remote Control Operation
You can use the air conditioner easily by selecting a mode and then by controlling the temperature, fan speed, and air direction. For remote control buttons related to each operation, see the pages at the front of this manual.
Inserting batteries | 1 Controlling temperature | |
|
|
|
At a Glance
two 1.5V AAA type batteries
NOTE
•The descriptions in this manual are primarily made based on the remote control buttons.
•Although Ionizer (
) / d'light Cool / Usage / Filter Reset / Display are displayed on the remote control display, they are not available on this model.
•For the multi system Ionizer (
) / d'light Cool / Single user / Usage / Filter Reset / Display are displayed on the remote control display, but these functions are not available.
1Operation modes
You can change the current mode between Auto,
Cool, Dry, Fan, and Heat by pressing the 
button.
You can control the temperature in each mode as follows:
Mode | Temperature control |
Auto/ |
|
Cool/ | Adjust by 1 °C between 16 °C and 30 °C. |
Heat |
|
Dry | Adjust by 1 °C between 18 °C and 30 °C. |
Fan | You cannot control the temperature. |
NOTE
You can use the Cool, Dry, and Heat modes in the following conditions:
Mode | Cool | Dry | Heat | |
|
|
|
| |
Indoor | 16 °C to | 18 °C to | 27 °C or | |
temperature | 32 °C | 32 °C | less | |
Outdoor | ||||
temperature | 46 °C | 46 °C | 24 °C | |
Indoor | 80% or less |
|
| |
relative | _ | _ | ||
humidity | ||||
humidity |
|
| ||
|
|
|
•If the air conditioner operates in a high humidity environment in the Cool mode for an extended period of time, condensation may occur.
•If the outdoor temperature drops to
•For more information about outdoor temperature in the multi system, refer to the manual for the multi system.
