Selecting Energy Saving Mode
If you wish to save energy when using your air conditioner, select the Energy saving mode with the Energy saving button.
1If necessary, press the 
(On/Off) button.
Result: ◆ The air conditioner starts up in Cool mode with
Turbo fan speed.
◆The operation indicator on the indoor unit lights up.
◆The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Plugged in
◆Stopped
lt will start up normally after three minutes.
2Select COOL mode by pressing the 
button.
Note You can select the Energy saving mode only in COOL mode.
3Press the 
button.
Result: ◆ The indoor unit beeps.
◆The air conditioner runs in the Energy saving mode.
◆The outer air flow blade moves up and down.
◆To stop the Energy saving mode, press the 
button again.
4To adjust the temperature, press the 
button one or more times until the required temperature is displayed. Possible temperatures are
between 26°C and 30°C inclusive.
Note If you want to adjust temperature under 26°C, cancel the Energy saving mode before adjusting the temperature.
5To select the fan speed, press the 
button one or more times until the required setting is displayed.
6To control the direction of the air flow, refer to pages 16 and 17.
