Samsung AW069CB, AW129CB, AW149CB, AW109CB C Type $ 149CB/AW189CB ,QVWDOODWLRQcont, Type A Screws

C Type $:149CB/AW189CB ,QVWDOODWLRQ(cont.)

11

Top Support

Channel

12

Type A Screws

Type A Screws

13

11 Install the cabinet in the window.

11-1 Place the cabinet into the window with the top support channel positioned just in front of the bottom sash.

11-2 Pull the window down until it rests on the cabinet, just behind the top support channel.

11-3 Locate five screw holes along the cabinet bottom front edge. Center the cabinet, side to side, in the window and mount it to the window stool using five Type A screws.

➢For security, always make sure the bottom channel engages onto the inside front edge of the window. If your window sill dimensions are such that this is not possible, you may need to drill three additional holes equally spaced on the bottom channel to properly secure the cabinet.

➢For some windows, it may be necessary to install 5cm(2") wide strips of hard wood positioned along the width of the window to obtain the proper alignment and pitch. The wooden strip must be screwed down securely before resting the cabinet on top of it. Neglecting to ensure such security may risk having the air conditioner fall out of the window and hurting someone.

12 Extend the window filler panels.

12-1 When the window is pulled down, the window should rest on the cabinet just behind the window filler panel frames.

12-2 Slide the filler panels outward until they touch the sides of the window. Secure the panels by putting four Type A screws through the mounting holes in the panels and driving them into the window stool and sash.

13 Attach the security bracket with a Type A screw.

E-36