Ventilating Your Room
If the air in your room is stale, you can ventilate the room using the Fan feature.
1 If you wish to discharge stale air, push the ventilation lever on the front of the
unit to the right and open position ( 
).
Result: ◆ The air inside the room circulates and stale air is discharged outside.
Otherwise, push the ventilation lever to the left and closed position ( 
).
Result: ◆ The air simply circulates inside the room.
2If necessary, press the 
(On/Off) button.
Result: ◆ The air conditioner starts up in the mode selected when the unit was last used.
◆ The unit beeps twice.
3If the fan speed(F1, F2 or F3) is not displayed on the control panel:
◆ Press the 
button on the unit one or more times until the fan speed (F1, F2 or F3) is displayed.
Result: ◆ The unit beeps each time you press the 
button.
◆The air conditioner starts up in the Fan mode.
➢ | You can change modes at any time. | |
| When the air conditioner is in the Fan mode, the temperature | |
| cannot be set or displayed. | |
4 To set the fan speed: | ||
◆ Press the | button on the unit one or more times until the | |
desired fan speed(F1, F2 or F3) is displayed. | ||
|
| Low |
|
| Medium |
|
| High |
5 To control the direction of the air flow, refer to page 20. | ||
