Solving Common Problems, Technical Specifications

Solving Common Problems

Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call.

PROBLEM	EXPLANATION / SOLUTION
The air conditioner does not	◆ Check that the circuit breaker used for the air conditioner
operate at all	has not been triggered.
	◆ Check that the power cable is plugged into a wall socket and the
	socket is switched on, if necessary.
	◆ Check that the correct operating mode has been selected
	(cooling or airing).

The air conditioner does not	◆ Check that the correct operating mode has been selected.
cool	◆ The room temperature may be too low.

	◆ Dust may be blocking the air filter;
	refer to page 10 for cleaning instructions.
	◆ Check that there is no obstacle blocking the air flow into or out of the unit.

The air flow direction does not change when you set the air flow blade swing switch to the ON position

◆Check that the air conditioner has been switched on; if necessary, turn the operating mode selection dial.

Odours are permeated in the	◆ Air the room.
room during air conditioning

Design and specifications are subject to change without notice.

Model

Power Supply

AWT24F1ME

AWT24F1MEB/EC

AWT18F1ME

AWT18F1MEA/EB/EC 220-240V~, 50Hz

AWT19F1MEA

AWT24F1MB

AWT24F1MBA/BC

AWT20F1MB

AWT20F1MBA 220V~, 60Hz

AWT18F1MBB/BC

E-11