Samsung R1245AV, B1445AV, F1245AV, R1045A Washing a Load of Laundry, Overview of the control panel

Washing a Load of Laundry

Overview of the control panel

1.Digital graphic display

Displays the remaining wash cycle time,all of washing information and error messages.

2.Prewash selection button

Press the button to select pre-wash. Pre-wash is available only with Cotton, Coloureds, Synthetics, Delicates,baby programs.

3.Temperature selection button

Press the button repeatedly to cycle through the available water temperature options (cold water( ), 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C).

4.Rinse selection button

Press the rinse button to add rinse cycles. Maximum number of rinse cycles is five.

5.Spin selection button

Press the button repeatedly to cycle through the available spin speed options.

B1445AV	,	, 400, 800, 1200,	1400 rpm
B1245AV/B1245AS/B1245A/R1245AV/F1245AV	,	, 400, 800, 1000,	1200 rpm
B1045A /R1045A /F1045A	,	, 400, 600, 800,	1000 rpm

No spin : no spin, : rinse hold

The laundry remains in the drum without being spun after the final drain

Rinse Hold

The laundry remains soaking in the final rinse water.

Before the laundry can be unloaded, either “Drain” or the “Spin” program must be run.

6.Delay Start selection button

Press the button repeatedly to cycle through the available delayed start options (from 3 hour to 24 hours in one hour increments).

Displayed hours means the time of finished washing-cycle.

Washing a Load of Laundry

7.Silver Nano selection button

Silver Nano water is supplied in washing as well as the last rinse, featuring sterilization and antibacterial coating.

8.Half Load selection button

Press the button in case of half load(about 1~4kg) washing. This function saves washing time and energy.

9.Child Lock selection button

This is a button for preventing children from manipulating the washing machine. On/Off - To set the program on: Press the Start/Pause button to turn on the washing machine. Press and hold down the [Rinse] + [Spin] button for 2-3 seconds. It can only be activated when the machine is turned on. Once you set the baby program on while in washing, no button is activated until you set if off. Even the POWER button will not be activated. The Baby Program lamp lights on. To set the program off: Press and hold down the [Rinse] + [Spin] button again for 2-3 seconds, then the lamp lights off and is set off.

Note: Check out the Baby Program button first when no button is activated while the washing machine is working.

10.Fuzzy Control dial

Turn the dial to select one of the 14 available wash programs.

Cotton, Coloureds, Synthetics, Delicates, Wool, Hand wash, Quick, Rinse+Spin, Spin, Drain, Baby Program(Stains, Delicates, Coloreds, Cotton)

11.Start/Pause selection button

Press to pause and restart programs.

12. (On/Off) selection button

Press once to turn the washing machine on, press again to turn the washing machine off. If the washing machine power is left on for longer than 10 minutes without any buttons being touched, the power automatically turns off.

6 SAMSUNG Washing Machine Owner’s Instructions SAMSUNG Washing Machine Owner’s Instructions 7