Wireless Network

You can connect to network with a Wireless IP sharer.

1.A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the Wireless LAN Adapter on the rear panel of the player.

2.Set the network options. (See pages 36~39)

Broadband service

Wireless IP sharer

Wireless LAN Adapter

(not included)

Networking with PC for AllShare function (See pages 56~57)

NOTE

Use only the Samsung wireless LAN adapter with this player. (Model name: WIS09ABGN). Do not use this adapter with any other third-party players.

Please contact the retailer of this player for purchasing the wireless LAN adapter.

You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the wireless network.)

Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance, obstacles, interference by other radio devices, etc).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

1)Authentication Mode : WEP, WPAPSK, WPA2PSK

2)Encryption Type : WEP, AES

For the AllShare function, a PC must be connected in the network as shown in the figure.

04 Connections

English 27

Page 27
Image 27
Samsung BD-C5500/XEF, BD-C5500/EDC, BD-C5500/XAA, BD-C5500/XEE, BD-C5500/AFR manual Wireless Network, Wireless IP sharer