Wireless Network

You can connect to network with a Wireless IP sharer.

A wireless AP/IP router is required to make a wireless network connection.

Set the network options. (See pages 38~42)

Broadband service

Wireless IP sharer

Networking with PC for AllShare function (See pages 57~58)

NOTE

You must use a wireless IP sharer that supports IEEE 802.11 b/g/n. (n is recommended for stable operation of the wireless network.)

Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance, obstacles, interference by other radio devices, etc).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

1)Authentication Mode : WEP, WPAPSK, WPA2PSK

2)Encryption Type : WEP, TKIP, AES

For the AllShare function, a PC must be connected in the network as shown in the figure.

04 Connections

English 29

Page 29
Image 29
Samsung AK68-01859A, BD-C6500 user manual Wireless Network, Wireless IP sharer