Setup

Support

Software Upgrade

This menu allows you to upgrade software for performance improvements or additional services. You can check the current software version, upgrade using the Internet and set the Auto upgrade notification. If the product is properly connected to the network by cable or wirelessly, the product automatically connects to Samsung's website each time it is turned on and downloads update files if any valid upgrade exists.

Settings

Display

 

 

Audio

SoftwareDisc MenuUpgrade :

System

Audio

:

Network

Current Version

: XXX-XXXXXXXXX \

Subtitle

:

Language By Internet

Security

Auto Upgrade Notification : On

 

General

>Move "Select 'Return

Support

 

1.To select By Internet, press the ENTER button.

A popup message will appear if an update is available, asking if you want to upgrade.

2.If you select Yes, the product turns off automatically, restarts and then begins the upgrade. (Do not turn it on manually here.)

3.The update progress popup will appear. When the update is complete, the product turns off again automatically.

4.Press the POWER button to turn on the product.

￿NOTE

▪The Update is complete when the product turns off after restarting. Press the POWER button to turn on the updated product for your use.

Never turn the product off or on manually during the update process.

▪Samsung Electronics shall take no legal responsibility for product malfunction caused an unstable internet connection or consumer negligence during software upgrade.

You can also update software in any of the two ways as follows: Software update is the same as in the By Internet menu.

•USB : Visit www.samsung.com/bluraysupport, then download and store the latest software (RUF file) onto a USB flash drive. Connect the USB flash drive to the USB port of the product (the disc tray must be empty) to update the software, then follow the on-screen instructions.

•CD/DVD : Visit www.samsung.com/ bluraysupport, download and write the latest software (RUF file) onto a disc. Insert and play the disc in the product to start the update, then follow the on-screen instructions.

￿NOTE

▪Software upgrades using the USB Host jack must be performed with no disc inside.

▪If you want to cancel the upgrade in the process of downloading the upgrade data, press the ENTER button.

▪When the system upgrade is done, check the software details in the software Upgrade menu.

▪Do not turn off the product during the System Upgrade. It may cause the product not to work properly.

▪Software upgrades using the USB Host jack must be performed with a USB memory flash stick only.

Contact Samsung

Provide contact information for assistance with your product.
44 English