Disc Storage

Be careful not to damage the disc because the data on these discs is highly vulnerable to the environment.

Do not keep under direct sunlight.

Keep in a cool ventilated area.

Store vertically.

Keep in a clean protection jacket.

If you move your product suddenly from a cold place to a warm place, condensation may generate on the operating parts and lens and cause abnormal disc playback. If this occurs, wait for two hours before connecting the plug to the power outlet.

Then insert the disc and try to play back again.

Handling Cautions

Do not write on the printed side with a ball-point pen or pencil.

Do not use record cleaning or antistatic sprays. Also, do not use volatile chemicals, such as benzene or thinner.

Do not apply labels or stickers to discs. (Do not use discs fixed with exposed tape adhesive or leftover peeled-off stickers.)

Do not use scratch-proof protectors or covers.

Do not use discs printed with label printers available on the market.

Do not load warped or cracked discs.

Before connecting other components to this product, be sure to turn them all off.

Do not move the product while a disc is being played as the disc may be scratched or broken, or the product’s internal parts may be damaged.

Do not put a flower vase filled with water or any small metal objects on the product.

Be careful not to put your hand into the disc tray.

Do not place anything other than the disc in the disc tray.

Exterior interferences such as lightning and static electricity can affect the normal operation of this product. If this occurs, turn the product off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The product will operate normally.

Be sure to remove the disc and turn off the product after use.

Disconnect the AC power cord from the AC outlet when you don’t intend to use the product for long periods of time.

To clean a disc, wipe it in a straight line from the inside to the outside of

the disc.

• Do not expose the product to any liquid.

When the AC plug is connected to a wall outlet, the product will still draw power (standby mode) when it is turned off.

Apparatus must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the apparatus.

The main plug is used as a disconnect device and shall stay readily operable at any time.

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power cord from the AC outlet before cleaning.

Do not use benzene, thinner, or other solvents for cleaning.

Wipe the cabinet with a soft, dry cloth.

Restrictions on Playback

This product may not respond to all operating commands because some Blu-ray, DVD and CD discs allow specific or limited operation and features during playback.

Please note that this is not a defect in the product.

Samsung cannot assure that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, CD software and/or the manufacture of discs.

Please contact the SAMSUNG customer care center if you have questions or encounter difficulty in playing Blu-ray, DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on playback restrictions.

02 Safety Information

English 

Page 5
Image 5
Samsung BD-C7500/XER, BD-C7500P/XER manual Disc Storage, Handling Cautions, Maintenance of Cabinet, Restrictions on Playback