▪▪ Do not connect the player to your TV through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the television.

Case 2 : Connecting to a TV with an Audio/Video cable - Good Quality

1.Using an Audio/Video cable, connect the VIDEO OUT (yellow) / AUDIO OUT (red and white) terminals on the rear of the player to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals of your TV.

2.Turn on the player and TV.

3.Press the input selector on your TV remote control until the “VIDEO” signal from the player appears on the TV screen.

Audio/Video cable

Connections 04

Red White Yellow

✎✎NOTE

▪▪ Noise may be generated if the audio cable is placed too close to the power cable.

▪▪ If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See pages 20~21)

▪▪ TheTV. number and position of input terminals may vary depending on your TV set. Please refer to the user manual of your !! CAUTION

English 19