Samsung BD-D7000/ZA BD-LIVE Internet Connection, Initial Settings, Anynet+HDMI-CEC, System

Setup

BD-LIVE Internet Connection

Set to allow or prohibit an Internet connection when you use the BD-LIVE service.

• Allow (All) : The Internet connection is allowed for all BD-LIVE contents.

• Allow (Valid Only) : The Internet connection is allowed only for BD-LIVE contents containing a valid certificate.

• Prohibit : No Internet connection is allowed for any BD-LIVE content.

✎✎NOTE

`` What is a valid certificate?

When the player uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transmitted data to check if the disc is valid and sends the certificate back to the player.

`` The Internet connection may be restricted while you are using BD-LIVE contents.

System

Initial Settings

By using the Initial Settings function, you can set the language, Network Settings, etc.

For more information about the Initial Settings function, refer to the Initial Settings section of this user manual. (See pages 27~44)

Anynet+(HDMI-CEC)

Anynet+ is a convenient function that offers linked operations with other Samsung players that have the Anynet+ feature.

To operate this function, connect this player to a Samsung TV with an HDMI cable.

With Anynet+ on, you can operate this player using a Samsung TV remote control and start disc playback simply by pressing the PLAY ( ) button on the TV’s remote control.

For more information, please see the TV user manual.

•Off : Anynet+ functions will not work.

•On : Anynet+ functions will work.

✎✎NOTE

`` This function is not available if the HDMI cable does not support CEC.

`` If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.

`` Depending on your TV, certain HDMI output resolutions may not work.

Please refer to the user manual of your TV.

BD Data Management

Lets you manage the downloaded contents you accessed through a Blu-ray Disc that supports the BD-LIVE service and stored on an attached Flash memory device.

You can check the device’s information including the storage size, delete the BD data, or change the Flash memory device.

Change Device allows you to select either the player’s Internal Memory or External Memory (connected USB Device).

If the data to be stored from BD-LIVE is greater than the size of the remaining memory or the Internal Memory is full, connect an External USB device, then select External Device in the menu.

BD Data Management Screen Information :

•Current Device : Display the current connected device.

•Total Size : Total memory size of the device.

•Available Size : Available memory in the device.

•Delete BD data : Delete all BD data from the storage.

•Select Device : Change the storage location of BD data. Select Internal Memory or External Memory.

✎NOTE✎

`` In the external memory mode, disc playback may be stopped if you disconnect the USB device in the middle of playback.

`` Only those USB devices formatted in FAT file system (DOS 8.3 volume label) are supported. We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or faster read/write speed.

40 English