![](/images/new-backgrounds/1254578/25457823x1.webp)
Connections
Connecting to a TV | Connecting to an Audio System |
Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.
Audio
Video
NOTE
\\ If you use an
\\ An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
\\ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
\\ When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
\\ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
\\ To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2) HDMI cable.
\\ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP
12 English
You can connect the
Method 1 Connecting to an HDMI supported AV receiver
•Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your receiver.
•Best quality (Recommended)
Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder
•Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the product to the Digital Coaxial In jack of the receiver.
•Good quality
•You will hear sound only through the front two speakers with Digital Output set to PCM.
Method | 1 | Method | 2 |
Audio |
| Audio |
|