5.To change the play list, press the @ or RETURN button to return to the Music List. Repeat Steps 2, 3, and 4.

6.To cancel the play list and return to the Home screen, press the RETURN or EXIT button.

✎NOTES✎

`` You can create a playlist with up to 99 tracks on Audio CDs (CD-DA).

`` If you remove all the tracks from a play list and then press the vbutton, the player lists and plays all the tracks on the disc.

Playing Photo Contents

You can control the playback of photo content located on a Blu-ray disc, DVD, CD, USB device, or your computer.

Using the Tools Menu

During playback, press the TOOLS button.

Start Slide Show/

Select to start or stop the slide

Stop Slide Show

show.

Slide Show Speed

Select to set a slide show's speed.

Background

Select to listen to music while

Music

viewing a slide show.

Zoom

Select to enlarge the current

picture. (Enlarge up to 4 times)

Rotate

Select to rotate the picture. (This

will rotate the picture either

 

clockwise or counter clockwise.)

Information

Shows the picture information.

✎✎ NOTES

`` Depending on the disc or storage device, the Tools menu may differ.

`` To enable the background music function, the photo file must be in the same storage media as the music file.

However, the sound quality can be affected by the bit rate of the MP3 file, the size of the photo, and the encoding method.

`` You can't enlarge the subtitle and PG graphic in the full screen mode.

Appendix

 

 

 

 

Troubleshooting

Before requesting service, please try the following solutions.

 

 

 

PROBLEM

SOLUTION

No operation can be

• Check the batteries in the remote control. They may need replacing.

performed with the remote

• Operate the remote control at a distance of no more than 6.1m from the

control.

player.

 

• Remove batteries and hold down one or more buttons for several minutes

 

to drain the microprocessor inside the remote control to reset it. Reinstall

 

batteries and try to operate the remote control again.

 

Disc does not play.

• Ensure that the disc is installed with the label side facing up.

 

• Check the region number of the Blu-ray Disc/DVD.

 

Disc Menu does not appear.

• Ensure that the disc has disc menus.

 

 

 

The prohibition message

• This message appears when an invalid button is pressed.

appears on the screen.

• The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).

 

• You’ve requested a title or chapter number or search time that is out of range.

 

Play mode differs from the

• Some of the functions selected in the Setup Menu may not work properly if

Setup Menu selection.

the disc is not encoded with the corresponding function.

 

The screen ratio cannot be

• The Screen Ratio is fixed on your Blu-ray Disc/DVD.

changed.

• This is not a problem with the player.

 

No audio.

• Make sure you have selected the correct Digital Output in the Audio Options

 

Menu.

 

19