Samsung BD-P2500 user manual Connecting to a TV with DVI Cable Best Quality

connections

Connecting to a TV with DVI Cable (BEST QUALITY)

1.Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player to the DVI IN terminal of your TV.

2.Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the AUDIO (red and white) IN terminals of your TV.

Turn on the Blu-ray Disc Player and TV.

3.Press the input selector on your TV remote control until the DVI signal from the Blu-ray Disc Player appears on your TV screen.

~If you have set the remote control to operate your TV (see pages 18~19), press the TV INPUT SEL. button on the remote control and select HDMI as the external source of the TV.

Connecting the HDMI cable while the Blu-ray Disc Player’s power is on will result in the player’s video output being changed to HDMI mode automatically (see page 41).

M ` Depending on your TV, certain HDMI output resolutions may not work.

Please refer to the user's manual of your TV.

`If an HDMI-DVI cable is plugged into the TV, the Blu-ray Disc Player’s output resolution is set to HDMI automatically within 10 seconds.

`If Component and HDMI are both connected, HDMI mode is automatically selected. (See page 41)

`When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output resolution will be automatically set to the highest provided by the TV

`If the HDMI cable is connected or removed during playback of a CDDA, the player will stop playing.

1 A

HDMI-DVI cable

(not included)

Audio Cable

Red White

22_ connections