Congratulations
With the BOSSCOM controller installed inside your Bang & Olufsen Beo4
remote control, you can fully operate your non B&O TV with this terminal.
This guide explains how.
If your Beo4 has already been correctly set up, you can now proceed to one
of the two operation tables:
Important ! !
If the BOSSCOM controller has not yet been optimized for your setup,
refer to the installation section about the initial setup and option program-
ming. There is no programming needed during everyday use.
The BOSSCOM controller that has been installed inside your Beo4 remote
control, can be used in any Beo4 remote control. Both rst generation mod-
els and the latest with extra buttons for manoeuvring, the Beo4 Navi.
To get the most of your modi ed Beo4, the BOSSCOM controller must be
programmed according to the Beo4 model and the environment that your
TV is a part of. Refer to page 5 and forward, for the initial setting.
*1 Extra buttons have been added on never Beo4 models, Beo4 Navi. Se page 10.
Page 9
If your Beo4 has enabled Navi buttons . *1
Page 8
In any other case.