Operating with BOSSCOM .
To be able to operate the non B&O TV optimal using the BOSSCOM
the user has to be familiar with the operations available when using the original remote
control, as described in the TV’s user manual.
A beo4 remote control is not equipped with as many keys as most remote controls for
non B&O devices. We have designed an operation ‘layout’ that works logically, even
common layout
for ma ns to other
functions.
The Beo4 Navi model introduces new buttons, making it easier to make operation
table’s, closer to the TV’s own.
Coloured function buttons.
To make room for easy access to more important functions, in some layouts we have
moved the coloured function buttons, to a lower layer. In these layouts to send a ‘color’
command, a must be pressed before the coloured button itself.
This way we are able to assign other functions to the coloured buttons in direct mode.
In a BOSSCOM environment the coloured buttons are often assigned to these opera-
tions:
Go, Navi or Stop shifted operation.
Some of the buttons has two or three operations. To get to these they have to be preced-
ed with O or .
In case of Beo4 Navi a button has been a added to replace the button, when
in ‘mode 2’. In mode 2 the BOSSCOM uses the Center button for shifting, instead of
.01 egap ot refeR ..
Buttons that has been assigned secondary functions are listed in the operating table on
page 9.
Guide, EPG or similar.
Back, Backup, Return or similar.
Programme zapping. P+/ P- ,
Channel up/ down or CH+/ CH-.
BOOSCOM