Specifications
Category
SE-W164C
External DVD±R/RW Drive
DISC
Usable Discs
CD :
Interface Support
ACCESS TIME
(Random)
Data Transfer Speed
(Max)
Buffer Memory
Drive Installation
Operating
Environment
Disc Diameter Interface Port
Media Type
DVD+R
DVD+RW DVD+R DUAL
Temperature
Humidity
4.72Inch or 3.15 Inch (120mm or 80mm) USB 2.0
110ms (Random) 130ms (Random)
Write |
| Read |
PCAV 16X (21.6MB/sec) |
| CAV 12X (16.2MB/sec) |
| CAV 8X (10.8MB/sec) | |
| CAV 8X (10.8MB/sec) | |
| CAV 8X (10.8MB/sec) | |
PCAV 16X (21.6MB/sec) |
| CAV 12X (16.2MB/sec) |
|
| CAV 8X (10.8MB/sec) |
- |
| CAV 16X (21.6MB/sec) |
- |
| CAV 8X (10.8MB/sec) |
- |
| CAV 48X (7.2MB/sec) |
PCAV 48X (7.2MB/sec) |
| CAV 40X (6.0MB/sec) |
PCAV 32X (4.8MB/sec) |
| CAV 40X (6.0MB/sec) |
CLV 10X (1.5MB/sec) |
| CAV 40X (6.0MB/sec) |
CLV 4X (0.6MB/sec) |
| CAV 40X (6.0MB/sec) |
2MB |
|
|
Horizontal / Vertical(cannot use 3.15 Inch(80mm) discs) 41°F ~ 104 °F (5°c ~ 40°C)
10% ~ 80% (RH)
Size(Width x Height x Length)
Weight
MTBF
6.41X 1.96 X 9.13 Inch (163 X 50 X 232mm) 1,200g
125,000 POH(Duty 20%)
Note
Does not support
Cannot playback or record on both sides of a
The read/write capacity of the supported discs depends on the condition of the disc
and the recording format of the drive. Therefore, the read/write quality may not be perfect.
Fcc information to the user
This equipment has been tested and found to comply with the limits for a class B digital device. pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates.
Uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions. may cause harmful interference to radio communications However. there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception.
Wiich can be determined by tuming the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or experienced radio TV technician for help.
CAUTION
Change or modifications not expressly approded by the manufacturer responslble for comliance could void the user's authority to operate the equipment.
Laser Standand
IEC
The product specifications above may be changed improve device performance without prior notice.