Plug & Play
When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.
➣Any functions related to Digital TV (DVB) will only work in countries or areas where
Plug & Play
Start Plug & Play.
OK
Enter
1.Press the POWER
button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2.Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER
button to confirm your choice.
3.Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER
button.
➣We recommend setting the TV to "Home Use" mode for the best picture in your home environment.
➣"Store Demo" mode is only intended for use in retail environments.
➣If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4.The message "Check antenna input." is displayed with "OK" selected. Press the ENTER
button.
➣Please check that the antenna cable is connected correctly.
5.Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER
button to confirm your choice.
6.The message “Some DTV functions may not be available. Digital Scan?” is displayed. Press the ◄ or ► button to select “Yes” or “No”, then press the ENTER
button.
♦Yes: First an ATV search is performed and then a DTV ch. auto search is performed.
♦No: Only an ATV search is performed.
➣This function is supported for all countries except for the following countries: France, Germany, Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria.
7.The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER
button.
➣The channel search will start and end automatically.
The DTV channel scan menu appears and the DTV channel is automatically updated.
➣If the DTV channel is updated, the Source in the source list of the Input menu is automatically changed to DTV. After all the available channels are stored, the "Clock Set" menu appears.
➣Press the ENTER
button at any time to interrupt the memorization process.
➣For detailed descriptions about DTV channel update, refer to page 31 of this manual.
After all the available digital channels are stored, the screen to select a time zone is displayed depending on the country.
8.Press the ENTER
button.
Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ◄ or ► button. Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ▲ or ▼ button.
➣You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons on the remote control.
English - 11
