62
English Anynet+
Setting Up Anynet+
Option Description
Setup Anynet+ (HDMI-CEC)
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must
be set to On.
When the Anynet+ (HDMI-CEC) function is disabled, all
the Anynet+ related operations are deactivated.
Auto Turn Off
Setting an Anynet+ Device to turn Off automatically when
the TV is turned Off.
The active source on the TV remote must be set
to TV to use the Anynet+ function.
If you set Auto Turn Off to Yes, connected
external devices are also turned off when the
TV is turned off. If an external device is still
recording, it may or may not turn off.
■
■
Switching between Anynet+ Devices
1 Press the TOOLS button. Press the ENTER
E
button to select Anynet+ (HDMI-
CEC).
2 Press the ▲ or ▼ button to select Device List, then press the ENTER
E
button.
Anynet+ devices connected to the TV are listed. If you cannot find a device
you want, press the red button to scan for devices.
3 Press the ▲ or ▼ button to select to a particular device and press the ENTER
E
button. It is switched to the selected device.
Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the
Device List menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot
cancel the operation during the switching operation.
The time required to scan for devices is determined by the number of
connected devices.
When the device scan is complete, the number of devices found are not
displayed.
Although the TV automatically searches the device list when the TV is turned
on via the power button, devices connected to the TV may not always be
automatically displayed in the device list. Press the Red button to search for
the connected device.
If you have selected external input mode by pressing the SOURCE button,
you cannot use the Anynet+ function. Make sure to switch to an Anynet+
device by using the Device List.
■
■
■
■
■
■
■
U
Move
E
Enter
R
Return
Anynet+ (HDMI-CEC) : On ▶
Setup
Auto Turn Off : Yes
U
Move
E
Enter
R
Return
View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Receiver: Off
Setup
Press the TOOLS button to
display the Tools menu. You
can also display Anynet+ menu
by selecting Tools → Anynet+
(HDMI-CEC).
■
Media Play (USB & DLNA)
Anynet+ (HDMI-CEC)
Content Library
Internet@TV
Home Network Centre
Application
U
Move
E
Enter
R
Return
Anynet+ (HDMI-CEC) : On
Setup
Auto Turn Off : Yes ▶
BN68-01900M-01Eng.indb 62 2009-04-13 �� 10:07:41