¦Setting Up Anynet+
TPress the TOOLS button to display the Tools menu. You can also display Anynet+ menu by selecting Tools → Anynet+
❑Setup
■Anynet+ (HDMI-CEC) → Off / On
To use the Anynet+ Function, Anynet+
N When the Anynet+
■Auto Turn Off → No / Yes
Setting an Anynet+ Device to turn Off automatically when the TV is turned Off.
N The active source on the TV remote must be set to TV to use the Anynet+ function.
N If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.
■Searching Connections
TV | Input |
|
Source List | : TV | |
Edit Name |
| |
| | |
UMove | EEnter | RReturn |
TV | P9 |
|
View TV |
|
|
Select Device | | |
Record |
| |
Menu on Device | | |
Device Operation | | |
Receiver :Off | | |
Setup |
| |
UMove | EEnter |
|
RReturn |
|
|
Setup
Anynet+ |
| : Off |
Auto Turn Off |
| : Off |
Searching Connections |
|
|
UMove | EEnter | RReturn |
¦Switching between Anynet+ Devices
1.Press the TOOLS button.
Then press the ENTEREbutton to select Anynet+(HDMICEC).
2.Press the ▲ or ▼ button to select Select Device, then press the ENTEREbutton.
3.Press the ▲ or ▼ button to select to a particular device and press the ENTEREbutton. It is switched to the selected device.
4.If you cannot find a device you want, press the ▲ or ▼ button to select Setup, then press the ENTEREbutton.
5.Press the ▲ or ▼ button to select Searching Connections, then press the ENTEREbutton. The message Configuring Anynet+ connection is displayed.
When searching devices completes, the connected devices are listed in the Anynet+ menu.
NSwitching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation. N The time required to scan for devices is determined by the number of connected devices.
N When the device scan is complete, the number of devices found are not displayed.
N Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is on or under a specific circumstance are not displayed in the device list. Therefore select Searching Connections menu to search devices.
N If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
|
| |
Anynet+ Menu | Description | |
View TV | Anynet+ mode changes to TV broadcast mode. | |
Select Device | Shows the Anynet+ device list. | |
Menu on Device | Shows the connected device menus. E.g. If a DVD recorder is connected, the disc | |
menu of the DVD recorder will appear. | ||
| ||
Device Operation | Shows the play menu of the connected device. E.g. If a DVD recorder is connected, | |
the play menu of the DVD recorder will appear. | ||
| ||
Record | Starts recording immediately using the recorder. (This is only available for devices that | |
support the recording function.) | ||
| ||
Receiver | Sound is played through the receiver. |
