5
01 Getting Started
English
Install the Stand
See separate guide for installing the stand.
Stand (1EA) Guide Stand (1EA) Screws (9EA)
Follow the steps below to connect the TV to the stand.
1. Connect the Guide Stand to the Stand using five screws (M4 X L12) as shown.
1
2
2. With your TV upright, connect the TV to the Stand. 3. Fasten two screws (M4 X L12) at position 1, and then
fasten two screws (M4 X L12) at position 2.
✎
NOTE
x
Make sure to distinguish between the fro nt and back of the Stand and Guide St and when assembling them.
x
Make sure that at least two persons lif t and move the LCD TV.
x
Stand the product up and fasten the screw s. If you fasten the screws with the LCD TV pl aced down, it may lean to
one side.
(M4 X L12)
Top view
Front
Rear
Rear
Screws (M4 X L12)
Screws (M4 X L12)
Guide Stand
Stand
or
[LC650_USA]BN68-02541A-03Eng.indb 5 2010-06-25 오후 5:01:10