27
English
04 Advanced Features
✎
NOTE
x
Connect the Optical cabl e between the DIGITAL AUDIO OUT (OPT ICAL) jack on your TV and the Dig ital Audio Input
on the Home Theater.
x
When following the connec tion above, the Optical jack only ou tputs 2 channel audio. You will only hear s ound from
the Home Theater’s Front, Left and Righ t speakers and the subwoofer. If you want to hear 5.1 channel aud io, connect
the DIGITAL AUDIO OUT (OPTICAL) ja ck on the DVD / Satellite Box (i.e. Anynet Device 1 o r 2) directly to the
Amplifier or Home The ater, not the TV.
x
You can connect only one Home The ater.
x
You can connect an Anynet+ device usin g the HDMI cable. Some HDMI cabl es may not support Anynet+ functi ons.
x
Anynet+ works when the AV device suppor ting Anynet+ is in the standby or on statu s.
x
Anynet+ supports up to 12 AV devices in total. Note that you ca n connect up to 3 devices of the same t ype.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu Description
View TV Changes Anynet+ mode to TV broadcast mode.
Device List Shows the Anynet+ device list.
(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
¦Setting Up Anynet+
O
MENU
m
→ Application → Anynet+ (HDMI-CEC) → ENTER
E
■Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
✎
When the Anynet+ (HDMI- CEC) function is disabled, al l the Anynet+ related operations are dea ctivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
✎
If Auto Turn Off is set to Yes, running external d evices will turn off at the sam e time as the TV powers off.
However, a device may not turn off if record ing is in progress.
✎
May not be enabled dependi ng on the device.
[PC450-USA]BN68-02577A-05Eng.indb 27 2010-07-22 오후 4:01:30