28
English
Advanced Features
¦Switching between Anynet+ Devices 1. Anynet+ devices connected to the TV are listed.
✎
If you cannot find a device you wan t, press the Red button to refresh the lis t.
2. Select a device and press the ENTER
E
button. You can switch to the selected device.
✎
The Device List menu will o nly appear when you set Anyn et+ (HDMI-CEC) to On in the Applic ation menu.
x
Switching to the selected devi ce may take up to 2 minutes. You cannot cancel the op eration during the switching
operation.
x
If you have selected external in put mode by pressing the SOURCE b utton, you cannot use the Anynet+ funct ion.
Make sure to switch to an Anynet+ device by usin g the Device List.
¦Recording You can make a recording of a TV Program using a Samsung recorder.
1. Select Recording.
✎
When there are more than two re cording devices
x
When multiple recording d evices are connected, the reco rding devices are listed. Sele ct one recording device in
the Device List.
✎
When the recording device i s not displayed, select Device L ist and press the Red button to sea rch devices.
2. Press the EXIT button to exit.
✎
You can record the source streams by sele cting Recording: (device_ name).
✎
Pressing the
�
(REC) button will record whateve r you are currently watching. If you are watchin g video from
another device, the video fro m the device is recorded.
✎
Before recording, check whe ther the antenna jack is properl y connected to the recording devi ce. To properly
connect an antenna to a recordi ng device, refer to the recording devi ce’s users manual.
¦Listening through a Receiver You can listen to sound through a receiver (i.e Home Theater) instead of the TV Speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎
If your receiver suppor ts audio only, it may not appear in the devic e list.
✎
The receiver will work whe n you have properly connected the o ptical in jack of the receiver to the DI GITAL AUDIO
OUT (OPTICAL) jack of the TV.
✎
When the receiver (i.e Home Th eater) is set to On, you can hear sound out put from the TV’s Optical jack. Whe n
the TV is displaying a DTV (ai r) signal, the TV will send out 5.1 channel s ound to the receiver. When the source is a
digital component such a s a DVD and is connected to the TV via H DMI, only 2 channel sound will b e heard from
the receiver.
✎
NOTE
x
You can only control Anynet+ devices usi ng the TV remote control, not the button s on the TV.
x
The TV remote control may not work u nder certain conditio ns. If this occurs, reselect the A nynet+ device.
x
The Anynet+ functions do not oper ate with other manufacturers’ produ cts.
[PC450-USA]BN68-02577A-05Eng.indb 28 2010-07-22 오후 4:01:30