Samsung BN68-02611A-04 setup guide Connecting to a Local Area Network

Remote Control Buttons and Functions:

Connecting a USB Device for Media Play

Network Connection - Wireless

✎✎ This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, Volume buttons.

You can enjoy photo, music, and movie files stored on a USB device by connecting it to

TV Side Panel

You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a Samsung Wireless LAN Adapter

Turns the TV on and off.

Turns the remote control light on and off. When on, the

the TV and using the Media Play feature. To connect a USB device for Media Play, follow

(WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the USB1 (HDD) or USB2 port on the back of your TV. See the illustration below.

Press to switch between the sources (Blu-ray player, cable box, DVD player, etc.) connected to your TV.

Press number buttons for direct access to channels.

Press to select additional digital channels broadcast by the same station. For example, to select channel

54-3, press 54, press -, and then press 3.

Adjusts the volume.

buttons become illuminated for a moment when pressed. (Using the remote control with this button set to off will reduce the battery usage time.)

Return to the previous channel.

Cut off the sound temporarily.

Change channels.

✎✎ If your TV is attached to a cable or satellite box, you change the channel using the box’s remote.

these steps:

1.Turn on your TV.

2.Connect a USB device containing photo, music and/ or movie files to the USB1 (HDD) or USB2 jack on the side of the TV.

3.When the Application selection screen appears, press the EnterEbutton on your remote to select Media Play (USB).

MediaPlay

Videos

SUM A Change Device

USB Drive

D View Devices EEnter RReturn

The LAN Port on	Wireless IP sharer	TV Side Panel		TV Rear Panel
	(AP having DHCP Server)		or
the Wall
	LAN Cable	Samsung Wireless	Samsung Wireless
		LAN Adapter	LAN Adapter

Samsung’s Wireless LAN adapter supports the IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, and IEEE 802.11N wireless communication protocols. For your TV to connect to your network, the wireless router or modem you use must also support one of these protocols. The fastest of these protocols is IEEE 802.11N.

Most wireless network systems incorporate a security system that requires devices

Displays the channel list on the screen.

View the Media Play.

Quickly selects frequently used functions.

Selects the on-screen menu items and changes the values seen on the menu.

Return to the previous menu.

Colored buttons for use in the Channel List, Media Play menu, etc.

Use these buttons in the Media Play and Anynet+ modes.

Displays the main on-screen menu.

Displays Favorite Channel Lists on the screen.

Press to display information on the TV screen.

Exit the menu.

S.MODE: Selects the sound mode.

SLEEP: Setting the Sleep Timer.

MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast).

Connecting to a Local Area Network

To enjoy watching streaming content from online providers such as You Tube and

Blockbuster, you must follow the steps below to connect the TV to your network.

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below:

The Modem Port on the Wall	External Modem	TV Rear Panel
	(ADSL / VDSL / Cable TV)
	Modem Cable	LAN Cable

that access the network through an access point or AP (typically a wireless modem or router) to transmit an encrypted security code called an access key.

For regular connections, your TV is compatible with the following security protocols:

•Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK

•Encryption Type: WEP, TKIP, AES

Configuring the Network Connection - Wireless

The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure network connections automatically. If your have a Static IP network, see your user’s manual for configuration instructions.

To configure your network connection for a network that uses DHCP, follow these steps:

( : controls recording on Samsung recorders with the Anynet+ feature)

P.MODE: Selects picture mode.

P.SIZE: Choose the picture size.

CC: Controls the caption decoder.

The LAN Port on the Wall TV Rear Panel

1.	Connect your TV to your network as
	shown in the illustrations above.
2.	Turn on your TV, press the
	MENU button on your remote, and
	the select Setup → Network.
3.	Set the Network Type to Wireless if

Network Setup

Select a network	: Not Selected	►
Internet Protocol Setup	: Auto
IP Address	:
Subnet Mask	:
Gateway	:

Selecting a Source

To watch a movie on your Blu-ray player or watch your favorite TV show, you must select the correct

Changing Channels and Adjusting the Volume

You can change the channel and

adjust the volume by using

LAN Cable

it is not already set to Wireless.

4. Select Network Setup. The

Network Setup screen appears.

DNS	: Auto
DNS Server	:
	UMove EEnter RReturn

source. A source is a device, such as a Blu-ray/ DVD player, a cable/satellite box, antenna or a cable TV input. Sources can be connected to

your TV through the HDMI, DVI, Component,

Composite, or D-sub connections, or through the Antenna or Cable In connections.

To view the signal from a source connected to the HDMI, DVI, Component, Composite, or D-sub jack, press the Source button on your remote. Each time you press the Source button, you change to a different source.

the CH and VOL buttons on the
remote. You can also change	Remote control sensor	Power Indicator
the channels by pressing the

zbuttons on the front

panel of your TV and adjust the

volume by pressing the y buttons.

Setting the Clock

Configuring the Network Connection - Wired

Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network connections. Home networks that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually.

To configure your network connection for a network that uses DHCP, follow these steps:

5.	On the Network Setup menu, select an AP(Access Point) and ad hoc network.
	if you have selected network with a security key, the Security Key screen
	appears.
6.	Enter the s using the numbers on the remote, and then press the Blue button
	on your remote.
	✎✎ If your network uses WEP security encryption, 0~9 and A~F will be
	available on the Security Key screen. Use the Direction button on your
	remote to move to the characters and the enter key to select them.

Viewing the On Screen Menus

Before you can use your TV’s On/Off Timer, you must set the clock. To set the clock, follow these steps:

1.	Connect your TV to your network
	as shown in one of the illustrations
	above.
2.	Turn on your TV, press the Menu

Network Setup

Internet Protocol Setup	: Auto	►
IP Address	:
Subnet Mask	:

7.	On the Network Setup menu, set Internet Protocol Setup and
	DNS to Auto. The Auto acquires and enters the necessary internet values
	automatically.
8.	Select Network Test to check internet connectivity.

To view the On Screen Menus, follow these steps:

1. With the power on, press the Menu button	Menu
on your remote. The main menu appears.
The menu’s left side has the following menu
options: Picture, Sound, Channel,
Setup, Input, Application, and Support.

1.	Turn on your TV.
2.	Using your remote, press the
	Menu button on your remote.
	Then, select Setup → Time.
3.	Select Clock Mode, and then
	press the EnterEbutton.
	Set Clock Mode to Manual.

Clock Set

Month	Day		Year
--	--	----
Hour	Minute		am/pm

	button on your remote,
	and then select Setup → Network.
3.	Set the Network Type to Wired if it
	is not already set to Wired.
4.	Select Network Setup. The
	Network Setup screen appears.

Gateway	:
DNS	: Auto
DNS Server	:
	UMove EEnter RReturn

✎✎ For more information, see your user’s manual.

2. Press the ▲ or ▼ button on your remote to select a menu option, and then press the EnterEbutton.

✎✎ Select Auto if you have a digital

channel in your area and are

not using a cable/sat box.

--	--	--
LMove	UAdjust	EEnter RReturn

5.	On the Network Setup menu, set Internet Protocol Setup and DNS to Auto.
	Auto acquires and enters the necessary internet values automatically.
6.	Select Network Test to check Internet connectivity.

3.When done using the menu, press the Exit button on your remote to exit.

4.Select Clock Set, and then press the EnterEbutton. The Clock Set screen appears.

5.Using the number buttons on your remote, enter the month, day, year, hour, and minute. Use the ◄ or ► button to move between entry fields.

6.Press the Return button on your remote when done.

✎✎ Some networks are Static IP networks. If your network is a Static IP

network, you can not use DHCP to configure the network connection.

Instead, you must enter the IP Address, Subnet Mask, Gateway, and

DNS Server manually. For instructions explaining how to configure a

Static IP network, see your user’s manual.

BN68-02611A-04

English - 2