5
01 Getting Started
English
Install the Stand (UN19C4000, UN22C4000 / UN22C4010)
See separate guide for installing the stand.
Stand Base Stand Body
Follow the steps below to connect the TV to the stand.
RELEASE LOCK
ELEASE
SE
LOC
RELEA
1. Insert the stand body into the
stand base.
2. Screw the stand base to the stand
body.
3. Slide the TV onto the stand body.
✎
NOTE
x
Make sure to distinguish between the fro nt and back of the Stand and Guide St and when assembling them.
x
Lay the product down, with the screen fac ing up and fasten the screws.
Install the Stand (UN26C4000)
See separate guide for installing the stand.
s
s
s
s
s
Stand (1EA) Guide Stand (1EA) Screws (10EA)
Follow the steps below to connect the TV to the stand.
sss
s
s
1
s
s
ss
s
2
1. Connect the Guide Stand to the Stand
using five screws (M4 X L12) as shown.
2. With your TV upright,
connect the TV to the Stand
as shown.
3. Fasten two screws (M4 X
L8) at position 1, and then
fasten three screws (M4 X
L8) at position 2.
✎
NOTE
x
Make sure to distinguish between the fro nt and back of the Stand and Guide St and when assembling them.
x
Make sure that at least two persons lif t and move the LED TV.
x
Stand the product up and fasten the screw s. If you fasten the screws with the LED TV p laced down, it may lean to
one side.
ss
s
s
s
Top view
Rear
Guide Stand
Screws (M4 X L12)
Stand
(A)
(B)
5EA (M4 X L12)
5EA (M4 X L8)
[UC400019]BN68-02624A-04Eng.indb 5 2010-07-09 오후 3:15:51