Installing (continued) | GB |
|
| Installing over an kitchen furniture |
|
| If the underside of the appliance will be accessible |
|
| after installation, a separator panel G (fig. 5A) will |
|
| need to be mounted maintaining the distances |
|
| shown (fig. 5B).. |
����� |
|
|
|
| To allow fresh air circulation there must be openings |
����� | Fig. 5A | in the kitchen furniture (fig. 5A) of the sizes indicated |
| in fig.5B. | |
|
| |
| ���� |
|
����
�����
Fig. 5B
���������
|
| Installing over an oven |
|
| If the appliance is installed over an oven the panel |
|
| is not necessary (fig. 6A - 6B) |
|
| To allow fresh air circulation there must be openings |
|
| in the kitchen furniture (fig.6A) of the sizes indicated |
|
| in fig.6B |
����� |
|
|
|
| IMPORTANT: if there is an oven under the |
����� | Fig. 6A | induction hob it is advisable for it to have a cooling |
| ||
|
| fan.Do not use the induction hob while PYROLITIC |
| ���� | cleaning is in process. |
���� |
|
|
|
| WARNING: to allow the circulation of as |
|
| much fresh air as necessary, there must be at |
|
| least 40 mm between the induction hob module |
|
| and any appliance installed under it (fig. 6B).In any |
Fig.6B | ��������� | event, adequate aeration must be provided. |
| ||
|
|
- 22 - | TW966 |
|
