Software Requirements
The following software supports the
•DTX software: version 1.3 or later
•LinkWare software: version 2.5 or later
Installing the DTX-NSM Module and Optional SFP Module
Install the network module only on the main tester. Install an optional SFP (small form pluggable) module to test fiber links. You may install or remove the SFP module while the tester is on. See Figure 1.
WCaution
Leave the module bay cover in place when a network module is not installed.
Put the dust cap on the SFP port when an optical module is not installed. Put the dust cap on the optical module when not connected to a fiber.
can01.eps |
Figure 1. Installation
