Player setup location

This player can be used in a horizontal or vertical position depending on the installation location.

EUsing the player in a horizontal position

Remote control sensor “Front”

EUsing the player in a vertical position

Remote control sensor “Top”

Remote control sensor “Front”

Switch the remote control sensor to “Front” or “Top” depending on the installation location.

FRONT

Selector switch for

TOP

Remote control sensor

 

2Secure the stand to the player.

3Bundle the cables.

Pass the cables through the stand.

Securing the player to a TV stand, etc.

To prevent the player from falling, the stand can be secured to a TV stand, etc.

Using a screw (commercially available), attach the screw to the hole of the stand to secure the player.

Connection

Installing the vertical stand

When using the player in a vertical position, install the supplied stand.

1 Match the screw hole of the player and the stand.

Screw (diameter: approx. 1/8 inch (3 mm))

TV stand, etc.

The screw is attached on the stand.

Screw hole

17

Page 19
Image 19
Sharp BD-HP90U Installing the vertical stand, Player setup location, Securing the player to a TV stand, etc, Connection