Sharp BD-HP90U Information on MAC addresses, Confirm your setting Access Point Security key

Press ENTER, then enter the security key code.

• Enter the exact same security key which has been set in the wireless router.

• The security key code is manually entered using the screen for inputting characters. (See page 46.)

Enter the security key.

Security key:

Next

11

SETTINGS

7 Press a/b to select “desired access point” or “Other Network”, then press ENTER.

• For access points which are set to hide the SSID using the wireless router, select “Other Network” to set the access point.

Select the access point.

XXXXXXXXXXXX

YYYYYYYYYYYY

Other Network

• If selecting “desired access point”, go to step 10.

• If selecting “Other Network”, go to the next step.

8 Press ENTER, then enter the access point name.

• The access point name is manually entered using the screen for inputting characters. (See page 46.)

Enter the access point name.

Access Point:

Next

9 Select “Next”, then press ENTER.

10 Press a/b to select your appropriate security key, then press ENTER.

• When selecting WPA/WPA2, selectable security keys are PSK/TKIP and PSK/AES.

Select the security key.

OPEN

WEP

WPA-PSK(AES)

WPA-PSK(TKIP)

WPA2-PSK(AES)

WPA2-PSK(TKIP)

12Select “Next”, then press ENTER.

13For testing after confirming the settings, select “Test”, then press ENTER.

•If the test has failed, an error message appears. Retry to perform the settings after checking that the connection (page 21) is performed properly.

Confirm your setting.

Access Point: XXXXXXXXXXXX

Security key: XXXXXXXXXXXX

Test

14Follow steps 6–11 of “When selecting Cable” on pages 43–44 to complete the network connection settings.

Information on MAC addresses

A MAC address is a unique ID number for network equipment. A MAC address is necessary for MAC address filtering on the wireless router/access point.

Before the wireless communication setup is performed, we recommend writing down the MAC address and keeping it in a safe place. (The MAC address is displayed on the “Current Ethernet setup info.” screen when wireless communication is set (See step 5 of page 44).)

MAC address

Settings

45