Sharp BD-HP90U Displaying the Audio Information, Switching the Angle, Displaying the Angle Mark

Playback Functions

Displaying the Audio Information

You can display the audio information on the disc currently being played back by pressing AUDIO.

• The displayed contents vary depending on the disc.

BD VIDEO DVD VIDEO

The audio channel currently being played back will be displayed.

If multiple audio channels are recorded, you can switch the audio channel by pressing AUDIO.

DVD-RW DVD-R

When a recorded broadcast with stereo or monaural audio is played back:

“Stereo” is displayed. (Audio cannot be switched.)

NOTE

•When you play a program recorded in stereo or monaural, and if you are listening to the Bitstream sound via the digital output jack, you cannot select the audio channel. Set the digital audio output setting to “PCM” (page 40).

•Settings for audio can also be changed in the Function Control screen (Page 37).

•The operation of audio differs according to each disc. You may need to refer to the operation manual of the disc.

•The display for audio information automatically disappears after 5 seconds.

Switching the Angle

BD VIDEO DVD VIDEO

If multiple angles are recorded, you can switch between them.

Press ANGLE during playback.

•The display indicates the angle number currently being played back. Each time you press ANGLE, the angle switches.

To return to the previous angle, press ANGLE to cycle through the angles until you return to the original angle.

NOTE

•The displayed items vary depending on the disc.

•If you access the Function Control screen during playback of a BD/DVD video, it may be impossible to operate the BD/DVD video playback. In cases like this, close the Function Control screen.

•The operation of angles differs according to each disc. You may need to refer to the operation manual of the disc.

•The display for angle information automatically disappears after 5 seconds.

Displaying the Angle Mark

BD VIDEO DVD VIDEO

Switching Subtitles

BD VIDEO DVD VIDEO

If subtitles are provided in multiple languages, you can switch between them.

Press SUBTITLE during playback.

•The display indicates the subtitle number currently being played back, and the subtitles appear.

Each time SUBTITLE is pressed, the subtitles change.

•“–” is displayed if a disc has no subtitles.

•You can also select “Off”.

NOTE

•Settings for subtitles can also be changed in the Function Control screen (Page 37).

•The operation of subtitles differs according to each disc. You may need to refer to the operation manual of the disc.

•The display for subtitle information automatically disappears after 5 seconds.

You can change settings so that Angle Mark appears in the right bottom part of the screen when multiple angles are recorded. The settings can be changed in “Settings” – “Playback Setting” – “Angle Mark Display” (Page 41).

36