Sharp BD-HP90U operation manual Player setup location, Removing and replacing the terminal cover

Player setup location

Removing and replacing the terminal cover

Before connecting the player to a TV, the AC adapter, etc., remove the terminal cover on the bottom of the player.

1Remove the terminal cover on the bottom of the player.

b Bottom side of the player

EUsing the player in a vertical position

Pass the cables through the end of the terminal cover.

b Bottom side of the player

Pass the cables through here.

Replace the terminal cover so the cables pass through the end of the cover.

2Make the necessary connections to the player (pages 18–21, 23).

3Replace the terminal cover.

EUsing the player in a horizontal position

Pass the cables through the center of the terminal cover.

b Bottom side of the player

Pass the cables through here.

Replace the terminal cover so the cables pass through the center of the cover.

b Bottom side of the player

Installation example

Installation example

• See page 17 to install the vertical stand.

Securing bracket for the HDMI cable

The terminal cover has a securing bracket to prevent breakage of the HDMI cable. When the HDMI cable is not passed straight through the securing bracket, the terminal cover cannot be closed.

b Back of the terminal cover

Securing bracket for the HDMI cable

16