Power Levels and Time Variations
The power level function enables you to adapt the amount of energy dissipated and thus the time required to cook or reheat your food, according to its type and quantity. You can choose between six power levels.
Power Level | Percentage | Output |
|
|
|
HIGH | 100 % | 900 W |
MEDIUM HIGH | 67 % | 600 W |
MEDIUM | 50 % | 450 W |
MEDIUM LOW | 33 % | 300 W |
DEFROST | 20 % | 180 W |
LOW | 11 % | 100 W |
|
|
|
The cooking times given in recipes and in this booklet correspond to the specific power level indicated.
If you select a... | Then the cooking time must be... |
|
|
Higher power level | Decreased |
Lower power level | Increased |
|
|
Stopping the Cooking
You can stop cooking at any time so that you can:
•Check the food
•Turn the food over or stir it
•Leave it to stand
To stop the cooking... | Then... |
|
|
| |
Temporarily | Open the door. | |
| Result: | Cooking stops. |
| To resume cooking, close the door again and press | |
| the Start( | ) button. |
|
| |
Completely | Press the Stop( ) button. | |
| Result: | Cooking stops. |
| If you wish to cancel the cooking settings, press the | |
| Stop( ) button again. | |
|
|
|
Adjusting the Cooking Time
You can increase the cooking time by pressing +30s button once for each |
|
30seconds to be added. | EN |
•Check how cooking is progressing at any time simply by opening the door
•Increase the remaining cooking time
To increase the cooking time of your food, press the
Start( 
) button once for each 30 seconds that you wish to add.
•Example: To add three minutes, press the Start( 
) button six times.
Using the Auto Cook Feature
The five Auto Cook( 
) features include/provide
You can adjust the size of the serving by turning the dial knob.
Use only recipients that are
Open the door. Place the food in the centre of the turntable. Close the door.
1.Press the Auto Cook( 
) button.
2.Select the type of food that you are cooking by pressing
the Auto Cook( 
) button. Refer to the table on the following page for a description of the various pre- programmed settings.
3. Select the size of the serving by turning the dial knob.
4.Press the Start( 
) button.
Result: The food is cooked according to the pre-
programmed setting selected.
When cooking has finished, the oven will beep and flash “0” four times. The oven will then beep one time per minute.
9
