![](/images/new-backgrounds/1164254/1642547x1.webp)
Channel - Memorizing the Channels
Channel - Fine Tune
Sleep Timer
Your TV can memorize and store all of the available channels for both buttons to scan through the channels.
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: “Air/Cable”, “Auto Program” and “Add/Delete”.
Air/Cable |
The Fine Tuning function lets you manually adjust the TV’s tuner if you have difficulty tuning channels.
Adjust the fine tuning by pressing the ◄ or ► button.
To store the fine tuning setting in the TV’s memory, press the ENTER button.
|
|
|
|
|
|
| |||
|
|
| Fine Tune |
| |||||
|
| P 3 |
|
|
|
| |||
|
| 0 |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
| Reset |
|
|
|
| ||
|
| Move |
|
|
|
| Save |
| |
|
| Adjust |
|
|
|
| Return |
| |
|
|
|
|
|
|
|
|
|
|
You can select a time period of between 30 and 180 minutes after which the TV automatically switches to standby mode. Press the SLEEP button on the
remote control repeatedly until the 30 Min. appropriate time interval appears
(any of the preset values from “30 Min.” to “180 Min.”).
|
|
|
|
| Channel | |
Before your TV can begin |
| Air/Cable | :Air | ► | ||
memorizing the available |
| Auto Program | ► | |||
| ||||||
| Add/Delete | ► | ||||
channels, you must specify |
| Fine Tune |
|
| ► | |
the type of signal source |
|
|
|
|
|
|
that is connected to the TV |
|
|
|
|
|
|
(i.e., an antenna or a cable |
|
|
|
|
|
|
Move | Adjust | Return | ||||
system). |
|
|
|
|
|
|
Select “Air” or “Cable” by pressing the ◄ or ► button.
To reset the fine tuning to “0”, select ”Reset” by pressing the ▲ or ▼ button, then press the ENTER button.
Auto Program |
All available channels are |
Search
Setup - Time
Setup - Caption (depending on the model)
automatically stored in |
memory when channels are |
selected by the direct tuning |
function. |
Press the ENTER button |
at any time to interrupt the |
memorization process. |
Air 3
3%
Stop
Enter
Return
Clock
Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV.
(Just press the INFO button.)
|
| Time |
Clock |
| |
On Timer | ||
Off Timer | ||
Move | Enter | Return |
Your TV decodes and displays |
|
|
|
|
|
|
|
|
|
|
|
| Setup |
| |
the closed captions that are |
|
|
|
|
|
| |
| Plug & Play |
|
| ► | |||
broadcast with certain TV shows. |
| Language |
| : English | ► | ||
| Time |
|
|
| ► | ||
These captions are usually |
| Caption |
| : On | ► | ||
subtitles for the hearing impaired |
| Child Lock |
| : On | ► | ||
| Blue Screen | ► | |||||
or |
|
|
|
|
|
|
|
All VCRs record the closed |
|
|
|
|
|
| |
Move | Enter | Return | |||||
caption signal from TV programs, |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add/Delete
You can add or delete a channel to display the channels you want only. To use the “Add/Delete” function, first run Auto Program.
Select “Deleted” or “Added” by pressing the ENTER button.
|
| Add/Delete |
▲ More |
|
|
2 | : Added |
|
3 | : Deleted |
|
4 | : Deleted |
|
5 | : Deleted |
|
6 | : Deleted |
|
▼ More |
|
|
Move | Enter | Return |
On Timer / Off Timer
You can set the On/Off timers so that the TV will switch on or off automatically at the time you select.
➢ You must set the clock first.
☛Auto Power Off
When you set the timer “On”, the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer
“On” mode and prevents overheating or leakages, which may occur if a TV is on for too long.
so |
also provide closed captions. Most
Caption: On/Off
You can activate or deactivate the “Caption” function.
☛Misspellings and unusual characters sometimes occur during closed caption transmissions, especially those of live events. There may be a small delay before captions appear when you change channels. These are not malfunctions of the TV.
English -