Samsung CM1529-1/XEU manual Installation Instructions for Stacking, Replacement of Lamp

Installation Instructions for Stacking

	Important
	1.	Disconnect the power cord from the wall socket before attempting
		installation.
ENGLISH	2.	For stacking installation, you must use the “bracket plate” which is
		enclosed with this unit.
	3.	The maximum stacking height is two units.

Stacking the two units is limited to the following models.

CAUTION : Be sure the oven cavity is empty.

Installation

1.Stack two units together.

2.Remove 6 screws as shown in the figure.

3.Place the Bracket-plate to join the two units.

4.Attach and tighten 6 screws as shown in the figure here.

5.Ensure the top oven is at a safe and workable height.

Screw

Bracket-Plate

Replacement of Lamp

Important

1.Remove a screw securing the lamp cover.

You don’t need to remove outer panel to replace lamp.

2.Remove the lamp by rotating it clockwise.

3.Replace with a new lamp by rotating it counter-clockwise.

Lamp	Lamp Holder
Cover

Lamp

Outer(230V 25W)

Panel

18

CM1529_XEU_04030A_EN.indd 18

2011-07-11 7:02:22