KS3a_Eng_Wide.qxd 10/19/2002 1:03 PM Page 8
Switching Your Television On and Off
The mains lead is attached to the rear of the television.
*If you have purchased this television in the United Kingdom, refer to rear cover for further instructions on plug wiring.
1 Plug the mains lead into an appropriate socket.
âUse a wall socket with a voltage of between 220 and 240 Volts.
2Press the “ 
” (ON/OFF) button on the front of the television. Result: The Standby indicator lights up on the front panel.
3Press the POWER 
button on the remote control to switch the television on.
Result: The programme that you were watching last is re- selected automatically.
4To switch your television off, press the “ 
” (ON/OFF) button again on the front of the television.
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to reduce:
uPower consumption
uWear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you turn it on.
1Press the POWER 
button on the remote control.
Result: The screen is turned off and the Standby indicator on the front of the television lights up.
2To switch the screen back on, simply press the POWER 
button again on the remote control.
âDo not leave your television in standby mode for long periods of time (when you are away on holiday, for example). In this case, you should switch it off completely.
8
