Samsung CT2Z57, CT2Z47, CT2Z58, CT2Z55, CT2Z45, CT2Z50 manual Setup Time

Channel - Memorizing the Channels

Channel - Fine Tune

Sleep Timer

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels.

This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: “Air/Cable”, “Auto Program” and “Add/Delete”.

Air/Cable

The Fine Tuning function lets you manually adjust the TV’s tuner if you have difficulty tuning channels.

Adjust the fine tuning by pressing the ◄ or ► button.

To store the fine tuning setting in the TV’s memory, press the ENTER button.

	Fine Tune
P 3
		0
	Reset
Move		Save
Adjust		Return

You can select a time period of between 30 and 180 minutes after which the TV automatically switches to standby mode. Press the SLEEP button on the

remote control repeatedly until the 30 Min. appropriate time interval appears

(any of the preset values from “30 Min.” to “180 Min.”).

				Channel
Before your TV can begin		Air/Cable	:Air	►
memorizing the available		Auto Program		►
		Add/Delete		►
channels, you must specify		Fine Tune		►
the type of signal source
that is connected to the TV
(i.e., an antenna or a cable
	Move		Adjust	Return
system).

Select “Air” or “Cable” by pressing the ◄ or ► button.

To reset the fine tuning to “0”, select ”Reset” by pressing the ▲ or ▼ button, then press the ENTER button.

 Auto Program

All available channels are

Search

Setup - Time

Setup - Caption (depending on the model)

automatically stored in

memory when channels are

selected by the direct tuning

function.

Press the ENTER button

at any time to interrupt the

memorization process.

Air 3

3%

Stop

Enter Return

Clock

Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV.

(Just press the INFO button.)

		Time
Clock	-- : -- am
On Timer	-- : -- am Off
Off Timer	-- : -- am Off
Move	Enter	Return

Your TV decodes and displays
					Setup
the closed captions that are
		Plug & Play			►
broadcast with certain TV shows.		Language		: English	►
These captions are usually		Time			►
		Caption		: On	►
subtitles for the hearing impaired		Child Lock		: On	►
		Blue Screen			►
or foreign-language translations.
All VCRs record the closed
	Move		Enter		Return
caption signal from TV programs,

Add/Delete

You can add or delete a channel to display the channels you want only. To use the “Add/Delete” function, first run Auto Program.

Select “Deleted” or “Added” by pressing the ENTER button.

		Add/Delete
▲ More
2	: Added
3	: Deleted
4	: Deleted
5	: Deleted
6	: Deleted
▼ More
Move	Enter	Return

On Timer / Off Timer

You can set the On/Off timers so that the TV will switch on or off automatically at the time you select.

➢ You must set the clock first.

☛Auto Power Off

When you set the timer “On”, the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer

“On” mode and prevents overheating or leakages, which may occur if a TV is on for too long.

so home-recorded video tapes

also provide closed captions. Most pre-recorded commercial video tapes provide closed captions as well. Check for the closed caption symbol in your TV schedule and on the tape’s packaging: C C .

Caption: On/Off

You can activate or deactivate the “Caption” function.

English -