installing the hob

Important:

Be sure the new appliance is installed and grounded only by qualified personnel. Please observe this instruction. The warranty will not cover any damage that may occur as a result of improper installation.

Technical data is provided at the end of this manual.

Regulations and compliance

This appliance meets the following standards:

EN 60335 - 1 and EN 60335 - 2 - 6, relating to the safety of electrical appliances for household use and similar purposes;

EN 60350, or DIN 44546 / 44547 / 44548, relating to the operating features of electric cookers, hobs, ovens, and grills for household use;

EN 55014-1

EN 55014-2

EN 61000 - 3 - 2; and

EN 61000 - 3 - 3, relating to basic requirements for electromagnetic compatibility (EMC).

This appliance complies with the following EU Directives:

• 2006/95/EC, Low Voltage Directive

• 2004/108/EEC, Electromagnetic Compatibility Directive

Safety instructions for the installer

A device must be provided in the electrical installation that allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm. Suitable isolation devices include line protecting cut - outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors.

With respect to fire protection, this appliance corresponds to EN 60335 - 2 - 6. This type of appliance may be installed with a high cupboard or wall on one side.

Drawers may not be fitted underneath the hob.

The installation must guarantee shock protection.

The kitchen unit in which the appliance is fitted must satisfy the stability requirements of DIN 68930.

For protection against moisture, all cut surfaces are to be sealed with a suitable sealant.

On tiled work surfaces, the joints in the area where the hob sits must be completely filled with grout.

On natural, artificial stone, or ceramic tops, the snap action springs must be bonded in place with a suitable artificial resin or mixed adhesive.

Ensure that the seal is correctly seated against the work surface without any gaps. Additional silicon sealant must not be applied; this would make removal more difficult when servicing.

The hob must be pressed out from below when removed.

A board is to be installed underneath the hob.

The ventilation gap between the worktop and front of the unit underneath it must not be covered.

hobe t iinsng all

installing the hob _

Page 7
Image 7
Samsung CTI613EHST/XEE manual Installing the hob, Regulations and compliance, Safety instructions for the installer

CTI613EHST/XEE specifications

The Samsung CTI613EHST/XEE is a state-of-the-art built-in induction hob that brings advanced cooking technology and sleek design to contemporary kitchens. This model is known for its impressive blend of efficiency, safety, and user-friendly features, making it an appealing choice for home chefs and cooking enthusiasts alike.

One of the standout features of the CTI613EHST/XEE is its induction cooking technology. Induction hobs use electromagnetic fields to directly heat the cookware, resulting in rapid heating times compared to traditional gas or electric stoves. This efficiency not only speeds up the cooking process but also ensures that the surrounding areas of the hob remain cool to the touch, enhancing safety during meal preparation.

The hob features a generous surface area, accommodating multiple pots and pans simultaneously. Its four cooking zones are equipped with flex zones, allowing pots of various sizes to be placed anywhere on the hob. This versatility enables users to cook a wide range of dishes while maximizing the available cooking space. The touch control panel allows for effortless adjustments to heat levels, ensuring precise temperature management for each dish.

Another key characteristic of the CTI613EHST/XEE is its sleek, modern design with a glass ceramic surface that not only looks stylish but is also easy to clean. Spills can be wiped away with minimal effort, ensuring that maintenance is hassle-free. The hob is designed to integrate seamlessly into kitchen cabinetry, providing a seamless look.

Safety is a priority with this model, featuring child lock functions that prevent unintended use, as well as residual heat indicators that inform users when the cooking zones are still hot. The hob also offers an automatic shut-off feature, providing peace of mind in case a user forgets to turn it off.

Additionally, the Samsung CTI613EHST/XEE supports various cooking modes and has a boost function for quick heating, ideal for boiling water or searing meats. Its energy-efficient design contributes to lower electricity consumption, making it an environmentally friendly choice for the eco-conscious consumer.

In summary, the Samsung CTI613EHST/XEE is a cutting-edge induction hob that combines functionality, safety, and aesthetic appeal. With its advanced features, including induction cooking technology, flexible cooking zones, and user-friendly controls, this model is well-suited for those seeking a modern and efficient cooking solution in their kitchens.