Timer
There are two ways to use the timer:
Using the timer as a safety shutoff:
If a specific time is set for a cooking zone, the cooking zone will shut itself off once this period of time has elapsed. This function can be used for multiple cooking zones simultaneously.
Using the timer to count down:
The countdown timer cannot be used if a cooking zone has been switched on.
Setting the safety shutoff
The cooking zone(s) for which you want to apply the safety shutoff must be switched on.
1.Using the Timer control 
sensor, select the
cooking zone for which the safety shutoff time is to be set.
After the first active cooking zone is selected, touching the timer’s control sensor will cause the corresponding indicator to flash slowly.
For example, the front left indicator
corresponds to the front left cooking zone. | will appear in the timer |
display. |
|
The next active cooking zone is selected by touching the Timer control 
sensor again .
2. Use the Timer setting selectors (
or ) to set the desired amount of time, for example, 15 minutes, after which the cooking zone will automatically switch itself off.
The safety shutoff is now activated.
To display the time remaining for any of the cooking zones, use the Timer
control | sensor. |
|
|
| |||
The corresponding control indicator will begin to blink slowly. |
|
|
| ||||
The settings are reset using the Timer setting selectors ( |
|
|
| or |
| ). After the | |
|
|
|
| ||||
set period of time has elapsed, the cooking zone automatically switches itself off, an acoustic signal sounds as confirmation and the timer display indicates .
To make the settings more quickly, touch any of the |
|
| or |
| control |
|
|
| |||
sensors until the desired value is reached. |
|
|
|
|
|
If the 
control sensor is touched first, the time setting will begin at 99
minutes; if the 
control sensor is touched first, the time setting will begin at 1 minute.
