cOnnecting an aUDiO DeVice Using aUX in
This section explains how to connect the unit to an audio device.
This unit requires one analog audio jack for connecting to an audio device.
EnG
PUSH
AUX IN | ONLY FOR SERVICE | DC 12V 2A |
| ONLY FOR SERVICE |
|
AUX IN | ONLY FOR SERVICE | DC 12V 2A |
| ONLY FOR SERVICE |
|
AUX IN
audio cable (not supplied)
Earphones jack
external Device
AuX in
Connect AUX IN (Audio) on the back of the unit to the earphone jack of the external device or audio device.
if connected to an external device via AuX input while your Samsung galaxy device is docked or connected to a bluetooth device at the same time, the input source switches between the AuX and Samsung galaxy or bluetooth device by tapping the pAuSe button on the Samsung galaxy / bluetooth device. tap it again to switch to the other input source.
▪ Use the Function key on the remote control to switch between connected devices, if there are multiple devices connected to the Docking station.
▪Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
●connEctions
13
