Sylvania SRCD223B, SRCD227B owner manual Connecting to a Receiver with Dolby Digital Decoder

CONNECTING TO A RECEIVER WITH DOLBY DIGITAL DECODER

If using this TV/DVD/VCR to play a DVD disc, the TV/DVD/VCR outputs DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up to a receiver with Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters.

Use audio coaxial digital cables available at retail for the audio connections.

Center

speaker

Front speaker (left)

Receiver with Dolby Digital decoder

Surround

speaker (left)

Front speaker	ANT.	1
		L
(right)		AUDIO OUT
		R
		COAXIAL
		To DIGITAL AUDIO OUT
To COAXIAL DIGITAL		(PCM/BITSTREAM)
AUDIO INPUT jack		COAXIAL jack
Surround	Subwoofer
speaker
(right)
		[Fig. 8]

NOTES:

•Be sure to turn off the power to all components in the system before connecting another component.

•Refer to the Owner's Manuals for the components to be connected to the TV/DVD/VCR.

•If connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode. (See page 45 to set DOLBY DIGITAL to ON.)

•Unless connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD/VCR using incorrect settings may generate noise distortion, and may also damage the speakers.

•Only DVD audio is available using the COAXIAL digital audio out jack.

•For TV and VCR audio sound, please refer to “CONNECTING TO A STEREO SYSTEM” section on page 13). You will need to use these connection in addition to the above to enjoy TV and VCR sound through the same receiver.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

- 14 - EN

1C29