- 18 - EN
1C29

AUTOMATIC CLOCK SETTING

Make sure ...
•The TV/DVD/VCR is turned on.
•Confirm the TV/DVD/VCR is receiving a RF
(Radio Frequency) signal from either an antenna or
cable system connection using the ANTIN jack on
the rear of the TV/DVD/VCR.
NOTE:
•If a cable converter box is being used, make sure it
is powered on.
•You must use the TV/DVD/VCR remote control to
perform the clock setting procedure.
1Select “SETTING CLOCK”
Press the SETUPbutton on the
remote control.
Press the Arrow button Kor Lto
select “SETTING CLOCK”.
Press the ENTER button to enter
“SETTING CLOCK” menu.
2Set “AUTO CLOCK”to [ON]
Press the ENTER button until
AUTOCLOCK [ON] appears.
3Begin “AUTO CLOCK CH SEARCH”
Press the Arrow button Lto select “AUTO CLOCK
CH SEARCH”.
Press the ENTER button.
•The TV/DVD/VCR is now
searching for the station which
contain the auto clock set signal.
The search for a signal may take
up to 20 seconds per channel.
•“_ _” appears at the lower left of
the screen when the search has
ended.
•Auto Clock station- write down
the number(s) that appear on the
screen. These are the auto clock
station(s) in your area. See item
4 below.
•If no number(s) appear on the TVscreen, there are
no stations in your area which contain the Auto
Clock signal. Auto Clock Setting is not possible.
Please use Manual Clock Setting on page 17.
Press the SETUPbutton to exit the screen.
NOTE: During Auto Clock CH Search, the picture
may be distorted. This is normal.
4Enter the channel number that contains the
Automatic Clock Setting Signal
Press the SETUPbutton on the remote control.
Press the Arrow button Kor Lto
select “SETTING CLOCK”.
Press the ENTER button to enter
“SETTING CLOCK” menu.
Press the Arrow button Lto select
“AUTO CLOCK CH”.
Press the ENTER button, then
press the Arrow button sor B
until you locate Auto Clock Set
station number. See item 3 above.
Press the SETUPbutton to exit the
screen.
5Turn off the TV/DVD/VCR
Once the TV/DVD/VCR is turned off , it will period-
ically check and set the correct date and time.
– SETTING CLOCK –
BAUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [02]
MANUAL CLOCK SET
D.S.T. [OFF]
– SETTING CLOCK –
AUTO CLOCK [ON]
BAUTO CLOCK CH SEARCH
AUTO CLOCK CH [02]
MANUAL CLOCK SET
D.S.T. [OFF]
– AUTO CLOCK CH SEARCH –
08 10 13
_ _
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
BAUTO CLOCK CH [ 45]
MANUAL CLOCK SET
D.S.T. [OFF]
- TV/VCR SETUP -
TIMER PROGRAMMING
BSETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
- TV/VCR SETUP -
TIMER PROGRAMMING
BSETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
TD945_955UF(P01-35).QX33 04.7.30 2:17 PM Page 18