Disc Playback

1 Press OPEN/CLOSE button to open the disc tray.

2 Load one or more discs.

• Place a disc gently into the tray with the disc’s label facing up.

3	•	Press DISC SKIP button.
3	•	Rotate the carousel tray about 72 degrees so you can load the
	•	third, fourth, and fifth discs.
	•	Rotate the carousel tray about 120 degrees during playbacking.


4		Close the compartment by pressing the
		OPEN/CLOSE button again.

The DVD/CD function is automatically selected when Disc Skip is pushed.

To select a specific disc, press the

corresponding DIRECT PLAY (1, 2, 3, 4, 5)

buttons on the front panel or DISC SKIP on the remote control, until the required disc indicator flashes.

• All the discs will be played in turn, starting with the one selected.

If you wish to play the current disc only, press REPEAT on the front panel one or more times, until REPEAT all DISC is displayed.

DVD VCD CD

•Playback starts automatically.

•Playback starts automatically.

•If the TV is on, a list of MP3s on the CD will appear on the TV screen.

Something like you

Back for good

Love of my life

More than words

I need you

My love

Uptown girl

If the disc selected is not loaded, the next disc is played automatically.

To stop playback,

press STOP during playback.

To temporarily pause playback, press PLAY/PAUSE during playback.

Note	•	Depending on the content of the disc, the initial screen may appear different.
	•	Depending on the recording mode, some MP3-CDs cannot be played.

•Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc.

•If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory.

If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.)